Snap-on Equipment JohnBean B600P Manuel D'utilisation page 34

Pictographs • Pictogrammes • Pictogramas
P14
P15
P16
P17
P19
P20
P22
34
P18
P21
P23
Layout
P14 Compensation run carried out.
P15 Start measuring run by pressing the START key or
by lowering the wheel guard.
P16 Set the Calibration weight.
P17 Make a mark on left tyre side.
P18 Make a mark on right tyre side.
P19 Fit tyre on rim and infl ate to the specifi ed infl ation
pressure.
P20 Rotate rim until valve is exactly perpendicular to
and above the chuck.
P21 Rotate wheel until valve is exactly perpendicular
to and above the chuck.
P22 Readjust tyre on rim until the mark coincides
precisely with the valve.
P23 Readjust tyre on rim until the double mark
coincides precisely with the valve.
......