Snap-on Equipment JohnBean B600P Manuel D'utilisation page 16

16
1 2
3
4-4
4-5
4-6
4-7
Layout
4.1 The screen
Fig. 4-4 Screen with display fi elds.
1 Display fi eld.
2 Information fi eld.
3 Commands fi eld.
The screen reads out inputs, helpful information, all
measured data and possible error codes.
Description of displayed fi elds
Each fi eld of the screen has a specifi c function.
1 Display fi eld
- Rim dimensions (editable).
- Balancing modes (editable).
- Unbalance value.
- List of Counters.
- C codes (User Codes).
- Help information.
2 Information fi eld
- Number of the installed program version.
- Measurements of the wheel being processed.
- Operating conditions icons.
- Error codes.
3 Commands fi eld
The pictographs illustrating basic and special functions
are located here.
Each key has an icon showing the specifi c function it
is used to retrieve.
Touch Screen
For the Touch Screen interface to respond to the touch,
it is necessary to touch an area of the screen with a
fi nger and release (Fig. 4-5).
The operator can hear a confi rmation tone, whenever
their own touch performs an action connected with
icons, buttons, text or images on the screen.
4.1.1 Screen pages / Menu
Types of Menu Fields
The Display fi eld shows the main Operating Screen
Pages:
Fig. 4-6 INTRO SCREEN
Basic screen / Main menu.
Fig. 4-7 RIM DATA ENTRY
Rim data entry screen.
......