Replacing The Ship's Propeller - Reely Hydro Force Notice D'emploi

10.

Replacing the Ship's Propeller

Proceed as follows to replace the ship's propeller:
• Remove the lock nut with a suitable tool (not included) (figure 7, item 1). To remove the nut, turn it to the left while
holding the ship propeller.
Attention!
The ship propeller is very sharp-edged. To avoid injury when replacing, wrap the ship propeller with a suita-
ble cloth.
• Pull the ship's propeller from the shaft.
• Install the new ship's propeller on the shaft so that the grooves of the ship's propeller latches in the grooves of the
drive shaft (figure 7, item 2).
Then secure the ship's propeller with the safety nut removed first (figure 7, item 1).
46
Figure 7