Sony HT-S40R Mode D'emploi page 33

Items
[SYSTEM] [AUTO STANDBY]
(Speaker
system
settings)
[VERSION]
(Version
information)
[SUR. AMP. INFO]
(Wireless amplifier
version
information)
[RESET] [ALL RESET]
(Resetting the
speaker
system)
[UPDATE] [START]
(Updating the
speaker
system)
[CANCEL]
Function
• [ON]: Turns on the auto standby function. When you do
not operate the speaker system for about 20 minutes, the
speaker system enters standby mode automatically.
• [OFF]: Off.
The current firmware version information of the speaker
system appears in the front panel display.
• [LATEST]: The wireless amplifier is the latest version.
• [PLEASE UPDATE]: The wireless amplifier is not the latest
version.
• [NOT CONNECTED]: The wireless amplifier is not connected
to the subwoofer.
You can reset the speaker system settings to the factory
default. For details, see "Resetting the Speaker System"
(page 41).
You can start software update after connecting the USB
memory on which the software update file is stored to the
speaker system. When there is a software update available,
we will notify you on the following website:
• For customers in Americas
https://www.sony.com/am/support
• For customers in Europe
https://www.sony.eu/support
• For customers in Asia-Pacific, Oceania, Middle East, and
Africa
https://www.sony-asia.com/support
Note
Before updating, make sure that the wireless amplifier
is turned on and connected to the subwoofer.
Returns to the upper layer [UPDATE].
33
US