Sony HT-S40R Mode D'emploi page 32

Items
[AUDIO] [DRC]
(Audio (Dynamic range
settings) control)
[A.VOL]
(Auto volume)
[DUAL]
(Dual mono)
[HDMI] [CONTROL FOR
(HDMI HDMI]
settings)
[TV AUDIO]
[BT] [POWER]
(BLUETOOTH
settings)
[STANDBY]
[USB] [REPEAT]
(USB settings) (Repeat play
mode)
32
US
Function
Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• [ON]: Compresses sound according to the information in
the content.
• [OFF]: Sound is not compressed.
Adjusts the volume automatically depending on the input
level from a connected device.
• [ON]: Adjusts the volume automatically.
• [OFF]: Off.
You can enjoy multiplex broadcast sound when the speaker
system receives a Dolby Digital multiplex broadcast signal.
• [MAIN]: Sound of the main language will be output.
• [SUB]: Sound of the sub language will be output.
• [M/S]: Mixed sound of both the main and sub languages
will be output.
Note
To receive a Dolby Digital signal, you need to connect a TV
or other device to the TV IN (OPTICAL) jack with an optical
digital cable or the HDMI OUT (TV (ARC)) jack with an HDMI
cable.
• [ON]: Enables the Control for HDMI function. Devices
connected with an HDMI cable can operate each other.
[ ]:
• OFF Disables the Control for HDMI function.
You can set whether the playback sound is input from an
HDMI cable or optical digital cable.
• [AUTO]: Plays the sound that is detected from either an
HDMI cable or optical digital cable. When you connect
either an HDMI cable or optical digital cable, the speaker
system plays by selecting the connected cable for the TV
input.
• [OPTICAL]: Plays the sound from the TV IN (OPTICAL) jack
for the TV input.
• [ON]: Turns the BLUETOOTH function on.
• [OFF]: Turns the BLUETOOTH function off.
Note
When the BLUETOOTH function is set to off, the BLUETOOTH
input is skipped while selecting input by pressing INPUT.
When the speaker system has pairing information, you can
turn the speaker system on and listen to music from a
BLUETOOTH device, even when the speaker system is in
standby mode, by setting the BLUETOOTH standby mode to
on.
• [ON]: Enables the BLUETOOTH standby mode.
• [OFF]: Disables the BLUETOOTH standby mode.
Note
While the BLUETOOTH standby mode is on, standby power
consumption increases.
• [OFF]: Repeat off. Plays back all tracks.
• [ONE]: Repeats one track.
• [FOLDER]: Repeats all tracks in the current folder.
• [RANDOM]: Repeats all tracks in the current folder in
random order.
• [ALL]: Repeats all tracks.