Sony HT-S40R Mode D'emploi page 22

1
Press and hold the BLUETOOTH
button on the subwoofer for 2
seconds.
The speaker system enters the
pairing mode, [PAIRING] appears in
the front panel display, and the
BLUETOOTH indicator flashes twice
in blue repeatedly.
2
On the mobile device, search for
the speaker system by performing
the pairing operation.
The list of the BLUETOOTH devices
that are searched appears on the
screen of the mobile device.
For the operation method to pair the
BLUETOOTH device to the mobile
device, refer to the operating
instructions of the mobile device.
3
Pair the speaker system and
mobile device by selecting "HT-
S40R" from the list on the screen of
the mobile device.
If a Passkey is requested, enter
"0000."
4
Make sure that the BLUETOOTH
indicator on the subwoofer lights
in blue and [BT] appears in the
front panel display.
A connection between the speaker
system and mobile device has been
established.
22
US
BLUETOOTH
button
5
Start audio playback with the
music app on the connected
mobile device.
Sound is output from the speaker
system.
6
Adjust the volume.
• Adjust the volume by pressing
 +/–.
• Adjust the subwoofer volume by
pressing SW  +/–.
•  and / can be used
for the BLUETOOTH function.
(Searching backward or forward by
holding down / does not
work.)
Notes
• You can pair the BLUETOOTH devices up
to the following number.
– Mobile devices: 9
– Sony TV with the BLUETOOTH function: 1
If a new device is paired after pairing the
above number of devices, the oldest
connected device will be replaced by the
new one.
• Perform pairing for the second and
subsequent mobile devices.
• When the input source does not contain
much bass sound, such as in TV programs,
the bass sound from the subwoofer may
be difficult to hear.
Tips
• You can check the connection status of
the BLUETOOTH function by checking the
BLUETOOTH indicator status.
• While the BLUETOOTH input is being
selected, the speaker system enters the
pairing mode by pressing the BLUETOOTH
button on the subwoofer shortly.