Sony HT-S40R Mode D'emploi page 13

3
Fasten the screws into the marks
() on SCREW LINE () of WALL
MOUNT TEMPLATE as in the
illustration below.
368.5 mm
(14 1/2 in)
Screws
5.5 mm to
6.5 mm
(approx.
7/32 in)
4
Remove WALL MOUNT TEMPLATE.
5
Hang the bar speaker on the
screws.
Align the holes on the rear of the bar
speaker with the screws, then hang
the bar speaker on the two screws.
Note
When sticking WALL MOUNT TEMPLATE,
smooth it out fully.
368.5 mm
(14 1/2 in)
Marks ()
Mounting the Surround
Speakers on a Wall
1
Prepare a screw (not supplied) for
each speaker that is suitable for
the wall mount hole on the rear of
the surround speaker.
More than 30 mm (1 3/16 in)
5 mm
(7/32 in)
10 mm
(13/32 in)
Hole on the rear of the surround speaker
2
Fasten the screw on a wall as in the
illustration below.
6 mm to
7 mm
(approx.
9/32 in)
3
Hang the surround speaker on the
screw.
Align the hole on the rear of the
surround speaker with the screw,
then hang the surround speaker on
the screw.
4 mm (3/16 in)
13
US