Connections And Controls - Dometic Waeco CombiPower 2012 Instructions De Montage

_CombiPower_IA_DE-IT.book Seite 68 Freitag, 21. Oktober 2011 8:10 20
Technical description
6.2

Connections and controls

No. in
fig. 1, Designation
page 3
1 POS (+)
2 NEG (–)
3 5A CHARGER/
2.5A charger
4 INV. AC OUTPUT 230 V inverter output
5 AC OUTPUT
6 AC INPUT
7 –
8 CIRCUIT
BREAKER
9 CHASSIS
GROUND
10 –
68
Explanation/function
Positive terminal
Negative terminal
5 A/2.5 A charger connection
 L: Live conductor
 N: Neutral conductor
 FG: Earth connection
230 V output
 L: Live conductor
 N: Neutral conductor
 FG: Earth connection
230 V input
 L: Live conductor
 N: Neutral conductor
 FG: Earth connection
Cover
LS: Circuit breaker (fig. 7, page 5)
The circuit breaker is triggered when there is
excess current or a short circuit.
➤ Eliminate the cause of the fault.
➤ Press the switch to reset the device.
Earth connection
Main switch:
 0: Off
 I: On
The main switch overrides the remote control set-
tings. When the main switch is in the "0" position,
you cannot switch on the device with the remote
control.
CombiPower
EN