Dometic Waeco CombiPower 2012 Instructions De Montage page 96

_CombiPower_IA_DE-IT.book Seite 96 Freitag, 21. Oktober 2011 8:10 20
Configuring the device with the remote control
"O/P Parameter" menu (output parameters)
Parameter Explanation
O/P Voltage Output voltage
O/P Output voltage frequency
Frequency
Sync Output voltage frequency toler-
Frequency ance for synchronisation
If the frequency tolerance is
disabled, the output voltage
frequency ranges between 47
and 63 Hz.
Overload Percentage power at which an
Alarm overload alarm is triggered
Saving Specifies the energy saving
Level mode: minimum load for switch-
ing on again
Disable = never
1 = 40 VA
2 = 80 VA
3 = 100 VA
4 = 120 VA
5 = 160 VA
6 = 180 VA
7 = 220 VA
Saving Interval at which the system
Interval checks whether a consumer unit
with the minimum load is
switched on
96
Value range
200 Vw – 240 Vw
47 Hz – 63 Hz
Disabled,
0.1 Hz – 7 Hz
50% – 110%
Disabled, 1 – 7
0.1 – 2 sec.
CombiPower
Default
230 Vw
50 Hz
7 Hz
100%
Disabled
2 sec.
EN