General Safety Instructions - Dometic Waeco CombiPower 2012 Instructions De Montage

_CombiPower_IA_DE-IT.book Seite 62 Freitag, 21. Oktober 2011 8:10 20

General safety instructions

2 General safety instructions
The manufacturer will not be held liable for claims for damage resulting from
the following:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
2.1 General safety
DANGER!
D
 Before you use the device for the first time, check that the oper-
ating voltage matches the mains voltage (see type plate).
 In the event of fire, use a fire extinguisher which is suitable for
electrical devices.
WARNING!
!
 Do not use the device if the device itself or its connection cables
are visibly damaged.
 This device may only be repaired by qualified personnel. Inade-
quate repairs may cause serious hazards.
Should your device need to be repaired, please contact custom-
er services.
 If a battery is connected, the device is live, even if the main
switch is turned off.
CAUTION!
!
 If you disassemble the device:
– Set the main switch to "0".
– Detach all connections.
– Make sure that no voltage is present at any of the inputs and
outputs.
62
CombiPower
EN