Explanation Of Symbols; General Safety Instructions - Dometic Waeco SinePower MSI912 Instructions De Montage Et De Service

SinePower
1

Explanation of symbols

!
WARNING!
Safety instruction: Failure to observe this instruction can cause
fatal or serious injury.
A
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

General safety instructions

2.1 General safety
The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
WARNING!
!
 Only use the device as intended.
 Do not operate the device in a damp or wet environment.
 Do not operate the device near any flammable materials.
EN
Explanation of symbols
37