Dometic Waeco SinePower MSI912 Instructions De Montage Et De Service page 44

Technical description
MSI1800T
The inverter has the following connections, displays and control elements on
the front:
No. in
fig. 7, Designation
page 5
1 Main switch
"ON/OFF/
REMOTE"
2 "Input Level" LED Displays the input voltage range
3 "Load Level" LED Displays the power being supplied
4 Dip switch
5 AC output
6 AC input
7 Fuse
8 Grounding screw Sets or removes the grounding bridge
44
Description
Switches the device on, off or to operation
via the remote control (accessory)
Makes settings on the inverter (such as
mains voltage, mains frequency, energy-
saving mode).
230 V output
230 V input
Protects the inverter from overload.
The fuse can be pressed in again once it
has triggered.
SinePower
EN