Dometic Waeco CombiPower 2012 Instructions De Montage page 92

_CombiPower_IA_DE-IT.book Seite 92 Freitag, 21. Oktober 2011 8:10 20
Configuring the device with the remote control
Selecting menus and parameters
NOTE
I
For the menu and parameter structure, see fig. e, page 9.
➤ Open setup mode.
➤ Use the "▼" or "▲" button to navigate to the required menu.
➤ Press the "
➤ Use the "▼" or "▲" button to navigate to the required parameter.
➤ Press the "
➤ Use the "▼" or "▲" button to set the value for the parameter.
➤ Briefly press the "
Quitting setup mode
➤ Press the "
Resetting all parameters to the original state
➤ Open setup mode.
➤ Navigate to the "Another Param" menu.
➤ Select the menu item "RST to Default".
➤ Press the "
✓ "ON" appears in the display.
➤ Press the "
✓ All parameters are reset to the original state.
92
" button to select the menu.
" button to select the parameter.
" button to save the value.
" button on the remote control.
" button to confirm.
" button again.
CombiPower
EN