Handling And Operation; Switching On And Off; Settings - SilverCrest 90468 Mode D'emploi

Handling and operation

Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
NOTICE
► If no setting is made and/or no button pushed within approx. 5 seconds the
device returns to its previous operating mode. Changed settings are saved.
Switching On and Off
♦ Press briefl y the
notice WELCOME appears.
♦ Briefl y tap the
♦ Briefl y tap the
AUTO DIM: The display illumination will, depending on the lighting conditions,
MAN DIM: The display illumination can be set in two stages (H = High and
♦ To switch off hold down the

Settings

WARNING
Hearing damage as a result of too high a volume!
If the volume is set too high it can lead to permanent hearing damage.
► Set the volume to moderate levels only.
Volume
♦ Turn the multi controller to set the volume.
Switching mute on and off
♦ Press the
♦ To switch the sound on again press the
switching is rescinded when receiving a PTY or TA station.
SAB 160 A1
/DIM button to switch the device on. In the display the
/DIM button. In the display appears MAN DIM H.
/DIM button again. In the display appears AUTO DIM.
set automatically (Default setting).
L = Low) by turning the multi controller.
button to switch the sound off . "MUTE" blinks in the display.
/DIM button longer.
button once more. The mute
GB
IE
15