Installation; Connection - SilverCrest 90468 Mode D'emploi

Installation

Installation
WARNING
With the installation of the device damage can occur!
► If possible have the device installed by a qualifi ed technician.
► If you want to install the device yourself, for safe and fl awless operation of
the device follow the instructions for connection and installation.

Connection

IMPORTANT
The use of incorrect connections can lead to damage to the
device.
► For installation use the device's ISO connections. The vehicle specifi c ISO
adapter that you may possibly require can be obtained from a specialist
establishment, from a local dealer or from the store's technical department.
When using other connection types the warranty becomes void!
Confi guration of the ISO connections
The view of the plug connector is from behind.
SAB 160 A1
ISO A (power
1 3 5 7
supply confi -
2 4 6 8
guration)
ISO B (spea-
1 3 5 7
ker connection
2 4 6 8
confi guration)
Confi guration
1 unconfi gured
2 unconfi gured
3 unconfi gured
4 Permanent positive 12 V (Tc. 30)
5 Antenna power
6 unconfi gured
Ignition circuit positive 12 V
7
(Tc. 15)
8 Negtative (-) chassis (Tc. 31)
Confi guration
1 Rear right +
2 Rear right -
3 Front right +
4 Front right -
5 Front left +
6 Front left -
7 Rear left +
8 Rear left -
GB
IE
9