Wichard SPARCRAFT Notice De Montage page 5

Traceability: number check.
For Sparcraft, each rig is unique, which is why we give
it an identification number enabling you to know where
it has come from and which route it has taken. This is a
way for us to guarantee the quality. Please note down
these numbers in this booklet.
- M ST N°
(engraved near where the sail joins, back face at the profile bottom)
- ST NDING N°
(on the bottom tip of the backstay)
P R E P A R A T I O N O F T H E M A S T A N D E Q U I P M E N T
Preparation of the tools necessar y for the operation
- identify each element of the mast and standing rigging;
- prepare the tools required for stepping the mast and the
adjustments;
- use the right equipment: this avoids damaging the equipment (mallet
instead of a hammer, for example).
Setting up and protecting the mast
- set the mast down on Trestles, which have been
protected by foam or other soft material.
The
centre of gravity of the mast
defined by a red mark on the mast packing. Indicate this mark (after
unpacking) with a strip of red tape.
w w w . s p a r c r a f t . c o m
_ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _
(where it is balanced to work on) is
2
/ 3