Publicité
Les langues disponibles
Les langues disponibles
P U T T I N G T H E M A S T I N P L A C E
8
Securing a deck stepped mast
- place the foot of the mast into its base;
fix the standing rigging: forestay, babystay, cap shrouds,
lower shrouds, runners, backstay just to secure the mast.
Tighten the turnbuckles
Fitting the furler: please
below).
read the instructions sup-
plied by the manufacturer.
Securing a keel stepped mast
8.1
The mast must be perpendicular to the vertical of the boat.
- fit the items (wedge and flange) from the mast
sleeve kit. The deck must be clear and the collar fixed
with flange ready to receive the mast;
- two people guide the bottom of the mast into its col-
lar above the deck and give instructions before cros-
sing the deck.
rations and gives instructions from inside the boat.
- pass the electric cables carefully through the deck
collar;
- lower the mast;
- simple step: guide the mast into its housing;
- U-shaped step: the same to fix the mast with the
axis going through the simple step;
The exact position of the axis depends on the adjust-
ment required: the further forward the axis, the
greater the rake. The neutral point is of course in the
middle (see the adjustments section12).
N.B.: to avoid any damage to the mast as it is lowered, protect it
(plastic film or padding).
12 /
simply by hand
third person helps with these ope-
to begin with (see
Neutral position in the
middle of the step
w w w . s p a r c r a f t . c o m
Publicité
