Publicité
Les langues disponibles
Les langues disponibles
B O O M A N D P O L E
-once raised to a comfortable position, insert the front tip of the boom
into the gooseneck.
N.B.: for some models, the ball joint is fitted in a different direction (deli-
vered upside down). Keep it this way up (Do not turn over).
- fit seals or collars on either side of the joint, according to the original
assembly;
- lock in position with a pin or bolt.
Taking in a reef with
continuous rigging
Reefing is carried out from the cockpit,
and the fitting process is no different
than that of a classic boom.
w w w . s p a r c r a f t . c o m
Installation
boom
Positioning
Pole
- check the mechanisms are working properly.
Lubricate if necessary;
- adjust the lengths of the pole up and pole down-
haul. Mark adjustment points on these with the mast
in place.
of
the
the
boom
on the ball joint on the
gooseneck fitting:
-manoeuvres with a short-handed
crew:
With the help of the topping lift or
directly
with
halyard, ease the weight on the
boom;
11
the
mainsail
/ 15
Publicité
