Before Machine Start-Up - Nilfisk SC400 9087313020 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BEFORE MACHINE START-UP

Brush or pad-holder installation
NOTE
Use either the brush (42) or the pad-holder (43) according to the type of floor to be cleaned.
1.
Insert the positioning pin (24) and disengage the machine transport/parking device (23b).
2.
Lift the brush/pad-holder deck (10) by prying the handlebar (2).
3.
Place the brush (42) or the pad-holder (43 and 44) under the deck.
4.
Lower the deck (10) by using the handlebar (2).
5.
Connect the power supply plug (21) to the electrical mains.
6.
Turn the knob (52) to program (53).
7.
Press the enabling push-button (59) together with the brush levers (60) to engage the brush/pad-holder to the deck hub (10). If
necessary, repeat the procedure until the brush/pad-holder is engaged.
Available brushes and their relevant application guides (suggestions only)
Models
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
General cleaning
Marble
Vinyl tiles
Rubber tiles
Rubber tiles
Polishing
Marble
Vinyl tiles
Squeegee installation
8.
Install the squeegee (11) and fasten it with the handwheels (12), then connect the vacuum hose (22) to the squeegee.
Solution tank filling
CAUTION!
Use only low-foam and non-flammable detergents, intended for automatic scrubber applications.
WARNING!
When using floor cleaning detergents, follow the instructions on the labels of the detergent bottles.
To handle floor cleaning detergents, wear suitable gloves and protections.
9.
Use the filler neck (35) or the removable filler hose (37) to fill the tank (28) with a solution suitable for the work to be performed.
Do not fill the solution tank completely, leave few inches from the edge.
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 40 °C.
Adjustments
10. Adjust the handlebar (2) with the lever (61) to reach a comfortable position.
USER MANUAL
MIDLITE GRIT 180
MIDGRIT 240
9099620000 - SC400
ENGLISH
PROLITE
UNION MIX
11

Publicité

Table des Matières
loading

Table des Matières