Invacare Aquatec Pure Bidet Manuel D'utilisation page 18

Aquatec® Pure Bidet
1. Press AUTO button F on the remote control.
•
The 3rd level for water pressure, the 2nd level for warm
air dryer temperature and the last setting of nozzle position
are automatically set-up.
•
The Sensor forces to set the water- and seat temperature
to "Medium", in case the temperature were set up on the
"High" position.
•
A buzzer sounds when the auto cleansing function finishes.
2. Press STOP button B on the remote control.
•
The automatic cleansing process is interrupted.
3. Press AUTO button F again.
•
The previous automatic cleansing process is resumed.
Setting water pressure
The water pressure can be set in five steps:
Press CLEANSING/MOVE button C on the remote control.
1.
Press HI respectively LO button K on the remote control.
2.
•
The water pressure of the cleaning nozzle is raised or
lowered by one step and displayed on the LED A.
The last set value of the water pressure is automatically
saved by the device.
18
Setting nozzle position
1. Press FR respectively BK button J during cleansing function
on the remote control.
•
The cleansing nozzles move forwards respectively
backwards.
When the cleansing process is complete and you move away
from the seat, the nozzle moves back into the last setting of
nozzle position.
Setting water temperature
The water temperature can be set in four steps:
Press WATER button I repeatedly on the remote control, until
1.
the desired temperature is reached.
•
The water temperature is displayed on the LED display
above.
If the cleaning functions are repeatedly started, the water
temperature drops gradually. To regain the desired water
temperature, suspend the cleaning function for three
minutes. The last value of the water temperature is
automatically saved by the device.
Setting seat temperature
The seat temperature can be set in four steps:
1557407-E