Invacare Aquatec Pure Bidet Manuel D'utilisation page 26

Aquatec® Pure Bidet
Fault
Low water temperature
Seat is not warm
Dryer air is not warm
26
Possible cause(s)
The water temperature level is turned off or
set to "LO"
Warm water can be used for about 40 seconds
at the "MID" setting. It will take about three
minutes to regain selected temperature.
The warm seat temperature level is turned off
or set to "LO"
The warm air dryer temperature level is
turned off or set to "LO"
Remedy
Turn on or increase water temperature level,
® 5.3 Using the shower toilet, page 17.
Turn on or increase seat temperature level,
® 5.3 Using the shower toilet, page 17.
Turn on or increase warm air dryer
temperature level,
® 5.3 Using the shower toilet, page 17.
1557407-E