Cleaning The Nozzles; Freeze Prevention During Winter; Changing Batteries Of Remote Control - Invacare Aquatec Pure Bidet Manuel D'utilisation

5. Reinsert the strainer on the inlet adapter.
6. Attach the PVC flexible hose to the inlet adapter.
7. Open shut off valve fully by turning counterclockwise.

Cleaning the nozzles

A
1. Press "CLEANSING / STOP" and "POWER SAVING" buttons
simultaneously on the control panel.
•
The nozzle A comes out and stops.
2. Clean the nozzle manually with a soft brush.
3. Press "CLEANSING / STOP" button.
•
The nozzle returns to its storage position and the self
cleaning function is automatically activated.

7.3 Freeze prevention during winter

1. Connect the power plug and check if the power unit is on.
2. Press WATER on the remote control, until the water
temperature is set to "Low" or higher,
® 5.3 Using the shower toilet, page 17.

7.4 Changing batteries of remote control

The battery life cycle depends on the frequency of use.
1557407-E
CAUTION!
Risk of remote control explosion
– Only use batteries of type AA (LR6) 1.5 V.
– Insert batteries according to the +/- indicator in the
remote control.
– Do not use old and new batteries together.
1. Change used batteries into new ones when "BATTERY SIGN"
LED blinks on the remote control, ® 4.1 Installation / Assembly,
page 10.
Maintenance
23