Repairs / Overhaul; Modification; Disposal / Recycling - Eaton CROUSE-HINDS Série Mode D'emploi

8 Repairs / Overhaul / Modification
Only original COOPER Crouse-Hinds parts shall be used for carrying out repairs.
In the event of damage to the flameproof encapsulation, replace-
ment of the photo-cell is mandatory. In case of doubt, the respective
photo-cell shall be sent to COOPER Crouse-Hinds for repair.
Repairs that affect the explosion protection may only be carried
out by COOPER Crouse-Hinds or by a qualified electrician in compli-
ance with the respective national regulations (IEC/EN 60079-19).
Apparatus modifications or design changes are not permitted.
They shall be used for their intended purpose and shall be in a perfect and
clean state.
Changing the light sensitivity
Filter
without
8
Explosion-protected photo cell Ex d, GHG 640 9601 P....
9
When the apparatus is disposed of, the respective national regulations on
waste disposal will have to be observed.
In order to facilitate the recycling of individual components, plastic parts
are provided with the identification mark of the plastic material used.
In case of disposal you can obtain additional information from your Cooper
Crouse-Hinds branch.
Subject to modifications or supplement of the product range.
Light sensitivity
10 - 15 Lux
07 - 12 Lux
04 - 11 Lux

Disposal / Recycling

GB