Description Of The Keyboard - Mectron PIEZOSURGERY touch Mode D'emploi

05.2 Û DESCRIPTION OF THE KEYBOARD
Touch keyboard
The user can configure the device by simply
touching on the touch keyboard.
Depending on the selected setting, the
electronic feedback system automatically
adjusts the correct operating frequency.
FUNCTIONS R
(ref. inside cover)
Depending on the type of surgery, it is possible
to choose one of the 6 options available from
the "function" list:
ENDO: dedicated to endodontic surgery and to
the detachment of the sinus membrane
PERIO: dedicated to periodontal surgery
SPECIAL: dedicated only to the inserts for
osteotomies with thicknesses of 0.35 mm and
for prosthetic applications
CANCELLOUS: dedicated to the cutting and
removal of poorly mineralized bone
CORTICAL: dedicated to the cutting and
removal of highly mineralized bone
IMPLANT: dedicated to bone perforation in the
technique of the implant site preparation
FILLING AND CLEANING THE IRRIGATION
CIRCUIT T
(ref. inside cover)
The device is equipped with the "pump/clean"
key which, depending on the mode of use,
allows to perform the PUMP function or the
CLEAN function.
The PUMP function can be used at the
beginning of the treatment, to flush the entire
irrigation line up to the insert, so that the
surgery can be started with the necessary
irrigation (see paragraph 05.4).
The CLEAN function allows to perform a
cleaning cycle of the irrigation circuit.
This function must be performed when you
have finished using the device and before
cleaning, disinfecting, and sterilizing all the
parts (see Cleaning and Sterilization Manual).
05 Û USE
EN
15