Mectron PIEZOSURGERY touch Mode D'emploi page 25

CORRECT
NOT CORRECT
Tighten the insert by using the Mectron
7
torque wrench;
To correctly use the Mectron torque wrench,
operate as follows:
Put the insert inside the wrench as shown;
8
Firmly hold the central body of the
9
handpiece;
CAUTION:The handpiece must not be
grabbed by its terminal part and/or cord,
but only by its central body.
The handpiece must not be rotated, but
must be grasped firmly, and you must
only rotate the wrench.
Rotate the wrench clockwise until the
friction snaps (the external body of the
wrench rotates compared to the handpiece,
emitting mechanical "CLICK" sounds).
The insert is now perfectly tightened;
On the keyboard, select the type of function
10
and irrigation necessary and the light, if
desired.
CAUTION: For the correct setting
of the Function parameters with the
specific insert you wish to use, consult
the Chart annexed to this manual titled
"Appropriate settings for the inserts
on the PIEZOSURGERY® touch" or the
illustrative leaflet of the Mectron insert
you've purchased.
05 Û USE
EN
21