Druck Einstellen; Setting The Pressure; Handrad Abschließen, Optional - Knocks Multi-Fix Série Mode D'emploi

Table des Matières

Publicité

Betriebsanleitung | Operating Instructions
2.
1.
26

Druck einstellen

– Ziehen Sie das Handrad (a) nach oben.
– Stellen Sie durch Drehen des Handrads (a) den
gewünschten Druck ein.
3.
– Drücken Sie das Handrad (a) nach unten.
a
Das Handrad ist dadurch wieder arretiert.
Handrad abschließen, optional
Um ein unbefugtes Ändern der Druckeinstellung
zu verhindern, kann das Handrad des Druckre-
gelventils mit einem Schlüssel abgeschlossen
werden.
Hinweis: Das Präzisions-Druckregelventil RGP
gibt den Eigenluftverbrauch (2,6 l/min) perma-
nent an die Umgebung ab. Bei diesem Vorgang
wird ein Leckagegeräusch erzeugt.

Setting the pressure

– Pull hand wheel (a) upwards.
– Turn hand wheel (a) to set the desired pres-
sure.
– Press hand wheel (a) downwards.
This relocks the hand wheel.
Locking the hand wheel (optional)
To prevent any unauthorized change of the pres-
sure setting, the pressure regulator hand wheel
can be locked using a key.
Note: The precision pressure regulator RGP
permanently releases the internal consumed
air (2.6 l/min) to the atmosphere. This action
produces a leaking noise.
Multi-Fix Serie
DE | EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Multi-fix bg0Multi-fix bg1Multi-fix bg3Multi-fix bg5

Table des Matières