Haverland RCM Manuel D'installation Et Utilisation page 41

3. OPERATION
PL03 Bespoke programme:
You only need to programme Monday (dd01). The programme will be
automatically repeated.
Once the word "PLAn" appears in the sub-menu, press "OK"
1
to enter. The "PL01" plan will appear on screen.
2
Then, press the
bespoke programme. Press the "OK"
3
"dd01"
The screen will indicate "00:00". Using the
4
choose the operating cycle, either comfort, economy or anti-
Comfort Cycle = Sun LED on
Economy Cycle = Moon LED on
Press "OK" to go to the next time slot (from 1am to 2am) and repeat the above process
5
the same programming made for Monday.
You only need to programme Monday (dd01) and Saturday (dd02). The
programme will be repeated from Monday to Friday and from Saturday to
Sunday.
With the "PL04"
and another programme for Saturday and Sunday
Repeat the steps described in the "PL03 Bespoke programme" point to set Mondays (the
programming created will be repeated from Monday to Friday).
step 5, "dd02"
also repeat this programming on Sundays.
ACTION
or buttons to choose the PL03
"OK" to continue
SCREEN
or keys,
with your desired
RCM
RCMS
EN
EN
.
41