Haverland RCM Manuel D'installation Et Utilisation page 40

EN
3. OPERATION
Then 00:00 will be displayed. With the
PRO
Press to switch to the next time slot (from 1am to 2am) and repeat the above process to choose
the desired operating cycle (comfort, economy or anti-freeze). Repeat the process hour by hour y day
by day.
search for that time slot by pressing the
changes, in order to exit the menu please press the
you exit of the sub-menu and the room temperature is displayed again.
RCM
40
RCMS
or
Comfort Cycle = Sun Red LED switched on
Economy Cycle = Moon Green LED switched on
The anti-freeze temperature is set at 7ºC.
This temperature can not be changed.
Once you have set the time schedule for the
entire week, the radiator will follow this chosen
plan. Please make sure that the radiator is on the
PROGRAMMING mode
P
buttons, choose the operating cycle: comfort,
side of the screen when the radiator is
heating.
In the "PLCF" plan, the radiator follows
user, according to their needs and in
accordance with the indicated comfort,
economy or anti-freeze cycles.
button. Once you have made the
button repeatedly until