Safety Instructions - Dreve EyeVolution MAX Mode D'emploi

EyeVolution ® MAX

4. Safety instructions

NB: Please read these instructions carefully before connecting and commissioning
the device. The operational safety and function of the device can only be guaranteed
if both the general statutory safety and accident prevention guidelines and the safety
information in the operating instructions are observed.
1. The device may only be used in
accordance with these operating
instructions. We do not accept any lia-
bility for damage incurred as a result
of non-designated use or incorrect
operation.
2. The device must be set up on a sta-
ble and level surface.
3. In order to prevent water (e. g.
spray water) ingress into the device,
the device should be set up in a dry
environment.
4. Do not store any highly-inflamma-
ble materials in the direct vicinity of
the device.
5. Never touch the mains plug with
wet hands.
6. Only use the plug-in power supply
provided; other power supply units
can cause damage to and failure of
the device.
7. Authorised operators: The owner of
the machine must provide the opera-
tor with the operating instructions and
ensure that he has read and under-
stood them. Only then may the opera-
tor commission the device.
20
8. Prior to each operating cycle, the
device must be examined to ensure its
impeccable condition and operational
safety. If it does not display an impec-
cable condition, the device may not be
used and must be marked accordingly.
9. Do not insert any objects into the
housing interior.
10. Do not lock the device operating
elements in place.
11. Never look directly at the LED
lights.
12. The device should be disconnected
from the mains supply for longer periods
of non-use.
13. Signs and labels must be kept
clearly legible and may not be
removed.
14. The mains plug must be removed
before cleaning and maintaining the
device or replacing parts.
15. The device may only be opened
and repaired by authorised specialists.
16. Only accessories and spare parts
approved by the manufacturer may be
used. We do not accept any liability for 18. It is imperative that the above
damage incurred by using parts which operating and maintenance condi-
have not been approved. tions in these operating instructions
are observed. The general accident pre-
17. Independent conversions and mod- vention regulations must be observed
ifications are not permissible for safety when working with the EyeVolution®
reasons. MAX.
5. Commissioning
Insert the mains cable in the device Important: Read the operating
socket (1) to establish a mains con- instructions thoroughly before commis-
nection. The power supply unit is sup- sioning the device for the first time. If
plied with the EU connector plug. The there are any interpretative problems,
plug adapters supplied for the UK, please contact the responsible depot or
Japan and the US can be replaced at Dreve Dentamid GmbH directly.
the mains device at any time.
Scope of supply:
Do this by pressing the push-button 1x EyeVolution® MAX light-curing
on the inside of the power supply unit device
and pulling the EU connector unit out 1x 24 V plug-in power supply unit
upwards. Insert the corresponding plug
adapter into the guide groove. Slide 1x plug adapter for UK
it forwards until it audibly clicks into 1x plug adapter for US/JAPAN
place. 1x operating instructions in
Only use the plug-in power supply pro-
vided for connecting to the mains sup-
ply; other power supply units can cause
damage to and failure of the device.
incl. EU connector
5 languages
21