Startup; Safety Instructions; Operator Instructions; Controls And Indicators - Valeo CITYSPHERE Instructions De Montage Et D'entretien

Masquer les pouces Voir aussi pour CITYSPHERE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.

STARTUP

5.1.

Safety instructions

The safety instructions in chapter 1.3 must be observed.
The system may only be started when the hood and air-distribution panel
have been fitted. Risk of injury due to motor fans.
5.2.

Operator instructions

The air conditioning system can only be put into operation with the vehicle
engine running.
5.3.

Controls and indicators

7
6
5.4.
Putting into service for the first time
a)
Start the vehicle engine and with it, observe the control panel. On the display for approximately
1 second
, and after that the actual version number of control panel should appear.
Approximately 3 seconds later it disappears and a steadily flashing point in the lower right of the
display signals the standby mode of the system.
b)
Start the vehicle engine as described in the owner's manual.
c)
Switch on system using On/Off button.
Depending on ambient temperature and temperature in the cabin, the system will operate in the cooling,
heating or ventilation mode (heating mode only comfort version).
WARNING
IMPORTANT
4
1
2
3
5
Fig. 5.1
Rooftop Air Conditioning System Citysphere
1 Fan
2 Outside temperature
3 On/Off
4 Display
5 Point
6 Downwards
7 Upwards
Page 61

Publicité

Table des Matières
loading

Table des Matières