Screen Description - INFOSEC UPS SYSTEM E4 Evolution II 100k TT S Manuel Utilisateur

Table 3-3: Audible Alarm
UPS condition
Power on/off
Battery mode
Low battery
UPS alarm
UPS fault

3-2. Screen description

3-2-1. Initial Screen
Upon powering on, the UPS will execute POST (Power-On Self-Test). The initial screen will remain
approximately 5 seconds as shown below.
3-2-2. Main Screen
After initialization, the main screen will display as shown below. Main Screen is divided into six sections.
(7) UPS operation mode: It shows the UPS current operation mode and status.
(8) UPS flow chart: It shows the current flow chart and measurement data.
(9) Main menu: Touch each icon to enter the submenu. Refer to the menu tree below.
(10) UPS power rating: It show the UPS power rating.
(11) Date and time: It shows the current date and time.
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
94
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 19 AA 59 203 07
Description
Buzzer sounds 2 seconds.
Buzzer sounds every 2 seconds.
Buzzer sounds every 0.5 seconds.
Buzzer sounds every 1 second.
Buzzer continuously sounds.
Initial Screen
Figure 3-3 Main Screen
Figure 3-4 Menu Tree