INFOSEC UPS SYSTEM E4 Evolution II 100k TT S Manuel Utilisateur page 83

8. Remove two fixing plates (
on the two sides of the unit. Loosen leveling
feet ( ) in figure by rotating them in
counterclockwise. Then, move the cabinet from
the pallet.
Unpack the package and check the package contents. The shipping package contains:
One UPS

 One user manual
One monitoring software CD

One RS-232 cable

One USB cable

 One parallel cable
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged during
transportation. Do not turn on the unit and notify the carrier and dealer immediately if there is any damage
or lacking of some parts. Please keep the original packages in a safe place for future use. It is recommended
to keep each equipment and battery set in their original packages because they have been designed to
assure the maximum protection during transportation and storage.
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
82
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 19 AA 59 203 07
9. To fix the cabinet in position, simply rotate
and ) located
leveling feet clockwise.