Technical Specifications - INFOSEC UPS SYSTEM E4 Evolution II 100k TT S Manuel Utilisateur

9. Technical specifications

MODEL
CAPACITY
INPUT
Voltage Range
Nominal Frequency
Frequency Range
Phase
Synchronized Range
Power Factor
THD (100% load)
i
* De-rating
Mains Input (Bypass)
Nominal Voltage
Voltage
Range
Voltage Range
Nominal Frequency
Frequency Range
Phase
Synchronized Range
OUTPUT
Phase
Output voltage
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
138
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 19 AA 59 203 07
E4 Evolution II E4 Evolution II
100K TT S 120K TT S
100KVA / 90KW 120KVA / 108KW
208-478 VAC (3-phase) @ 70% of load
305-478 VAC (3-phase) @ 100% of load
50Hz/60Hz(Auto-selectable)
3 Phase with Neutral(Three Phase, Neutral + Ground)
+/- 1Hz, +/- 2Hz, +/- 4Hz (default: 4Hz) User Programmable
< 3%@Full Load(@Linear Load)
Upper limit: +10, +15 or +20, default: +15%
Lower limit: -10, -20, -30 default:-20%
50Hz/60Hz(Auto-selectable)
+/- 1Hz, +/- 2Hz, +/- 4Hz (default: 4Hz)
3 Phase with Neutral(Three Phase, Neutral + Ground)
+/- 1Hz, +/- 2Hz, +/- 4Hz (default: 4Hz) User Programmable
3 Phase with Neutral(Three Phase, Neutral + Ground)
380/400/415VAC (Ph-Ph)
E4 Evolution II
160K TT S
160KVA / 144KW
40Hz ~ 70Hz
≧ 0.99 at 100% Load
380V/400V/415V
E4 Evolution II
200K TT S
200KVA / 180KW