Publicité
Remote control
1. Temperature up button
2. Mode button
3. Temperature down button
4. Timer button
5. Power button
6. Sleep mode button
7. Fan speed button
Transport and storage
• Clean the device before storing it.
• Transport the device in an upright position.
• Store the device in an upright position, in its original packaging, in a cool, dry, ventilated and
dust-free area larger than 12m
Installation
WARNING
• Do not put the power plug into the wall socket before the device is mounted
or placed correctly.
• Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 1400 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
The device is packed in one box. Remove all packaging material and check that the device is not
damaged. Do not use the device if it is damaged, but always contact your supplier. Keep the
packaging for safe storage and transport.
3
.
Figure 21.
35
Publicité
