Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(video/audio pixelling or freezing), while the P1 and P2 programs are not changed at all.
In certain situations, it could be necessary to stream out all the terrestrial transport stream available on the
input without any processing action.
For comply this request, the ALL-PID mode can be activated; in this way it will be possible to stream out the
digital signal without any processing.
The output transport-streams are modulated according to the DVB-T 2K standard. The compact headend
is equipped with an Ethernet network interface 10/100 which allows the management through the web inter-
face built-in by using a direct connection to a PC (by a crossed cable) or through a LAN network connection.
The packaging contains the following items:
•
D-Matrix 8T;
•
Power cord;
•
Safety warnings and product installation instructions;
•
By using the specific fixing points, install the product to the wall in vertical position in order to permit the
correct heat dissipation;
•
Connect the headend to the aerial grounding system;
•
Connect the RF coaxial cables to the desidered TV inputs;
•
Insert the Professional CAM and smartcards in their slots (if required);
•
Insert an external USB pendrive (if required);
•
Connect the compact headend to main power supply;
•
Wait for "booting" procedure before configuring the headend;
•
Check the correct RF output signal and the correct TV input reception status looking on the specific mul-
ticolour LEDs;
Install the product as shown in the figure below by using the specific fixing points. It's recommended to leave
enough space to connect the main power cord and for correct ventilation (15 cm airspace on all sides). Any
other type of installation could affect the correct functions of the device.
15cm
3. INSTALLATION OF THE PRODUCT
3.1 PACKAGE CONTENTS
3.2 PRODUCT MOUNTING INSTRUCTIONS
3.2.1 WALL MOUNTING
15cm
Operating instructions
33
Publicité
Table des Matières
