Publicité
How to Use
Turn On/Off
Press and hold the power button for 3 seconds to turn on the robot. The
power indicator should be illuminated. Place the robot onto the charging
dock, the robot should turn on automatically and begin charging. To turn off
the robot, move the robot away from the charging dock and press and hold
the power button for 3 seconds.
Fast Mapping
After configuring the network for the first time, follow the instructions in the
app to quickly create a map. The robot will start mapping without cleaning.
When the robot returns to the charging dock, the mapping process has been
completed and the map will be saved automatically.
Start Cleaning
Press the power button to start cleaning after the robot is turned on. Then,
the robot will accurately map out a route, methodically clean along the
edges and walls, then finish by cleaning each room in an S-shaped pattern
to ensure a thorough job.
Note: It is recommended that the robot set out from the charging dock
before cleaning. Do not move the charging dock while the robot is cleaning.
This ensures that the robot returns to charging dock smoothly.
Pause/Sleep
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn off. Press any button on the
robot, or use the app to wake up the robot.
Note: If the robot is paused and placed onto the charging dock, the current
cleaning task will end.
Auto Resume Cleaning
If the battery is too low, the robot will automatically return to the charging
dock to charge. After charging to the appropriate battery level, it will resume
unfinished cleaning tasks.
Note: To use this function, please open it in the App.
Do Not Disturb (DND) Mode
When the robot is set to Do Not Disturb (DND) mode, the robot will be prevented
from resuming cleaning and the power indicator will turn off. DND mode is
disabled by default at the factory. You can use the app to enable DND mode or
modify the DND period. The DND period is 22:00–8:00 by default.
Note:
· The scheduled cleaning tasks will be performed as usual during the DND period.
· The robot will resume cleanup where it left off after the DND period expires.
Spot Cleaning
When the robot is awaiting, press briefly the button
cleaning mode. In this mode, the robot cleans a square-shaped area of 1.5 x
1.5 meters around it and returns to its starting point once the spot cleaning is
completed.
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold the power
button for 10 seconds to forcefully turn it off. Then, press and hold the power
button for 3 seconds to turn the robot on.
EN
to enable the spot
11
Publicité
