Publicité
Connecting with Dreamehome App
EN
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
Note:
· Only 2.4 GHz Wi-Fi is supported.
· Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
10
2. Add Device
Open the Dreamehome app, tap " " in the upper right corner, and scan the
same QR code on the robot again to add the device. Please follow the prompts
to finish the Wi-Fi connection.
QR Code
Note:
· If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to
finish the Wi-Fi connection.
· To disconnect the device from Wi-Fi network, press and hold the Reset
button on the robot for 3 seconds.
Wi-Fi Indicator
· Blinking slowly: To be connected
· Blinking quickly: Connecting
· On: Connected
Publicité
