Publicité
14. Déclarations et certificats (original en anglais)
14. Déclarations et certificats (original en
anglais)
EU Declaration of Incorporation (DOI) (in accordance with 2006/42/EC Annex II B) Traduction des
instructions originales
Manufacturer:
Person in the Community
Authorized to Compile the
Technical File:
Description and Identification of the Partly-Completed Machine(s):
Product and Function:
Model
and
Serial Number
Incorporation:
It is declared that the above products fulfil, for what is supplied, the following directives as detailed below: When this partly
completed machine is integrated and becomes a complete machine, the integrator is responsible for the completed machine
fulfilling all applicable Directives, applying the CE mark and providing the Declaration of Conformity (DOC).
I. Machinery Directive
II. Low-voltage Directive
2014/35/EU
Reference to the harmonized standards used, as referred to in Article 7(2) of the MD & LV Directives and
Article 6 of the EMC Directive:
(I) EN ISO 13732-1:2008 as applicable, (I)(II) EN 60204-1:2018 as applicable, (II) EN 60664-1:2007, (II) EN 61140:2002/A1:2006
Reference to other technical standards and technical specifications used:
(I) ISO 9409-1:2004, (II) EN 60320-1:2021, IEC 61784-3:2010 [SIL2]
Manuel utilisateur
Universal Robots A/S
Energivej 51,
DK-5260 Odense S Denmark
David Brandt, Technology Officer, R&D
Universal Robots A/S,
Energivej 51, DK-5260 Odense S
Industrial robot multi-purpose, multi-axis manipulator with an OEM control
box & with or without teach pendant (with or without 3PE). Function is
determined by the completed machine (robot application or cell with end-
effector, intended use and application program).
Below cited documents and this declaration include:
Effective October 2020: Teach Pendants with 3-Position Enabling (3PE TP)
& standard Teach Pendants.
Effective May 2021: UR10e specification improvement to 12.5kg maximum
payload.
e-Series robots with either AC or DC OEM controllers:
UR3e OEM AC, UR5e OEM AC, UR7e OEM AC, UR10e OEM AC, UR12e OEM AC, UR16e
OEM AC
UR3e OEM DC, UR5e OEM DC, UR7e OEM DC, UR10e OEM DC, UR12e OEM DC, UR16e
OEM DC
Starting XY20215000000 and higher
Factory
Variantyear
e-Series
(12kg payload), 6 = UR16e
Sequential numbering, restarting at 0 each year
Universal Robots e-Series OEM robots (UR3e, UR5e, UR10e and UR16e)
shall only be put into service upon being integrated into a final complete
machine (robot application or robot cell), which conforms with the provisions
of the Machinery Directive and other applicable Directives.
The following essential requirements have been fulfilled: 1.1.2, 1.1.3, 1.1.5,
1.2.4.3, 1.2.5, 1.2.6, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9, 1.5.1, 1.5.5, 1.5.10, 1.7.2,
1.7.4, 4.1.2.3, 4.1.3, Annex VI. It is declared that the relevant technical
documentation has been compiled in accordance with Part B of Annex VII of
the Machinery Directive.
Reference the LVD and the harmonized standards used below.
35
3=UR3e, 5=UR5e, 7=UR7e, 0=UR10e, 1=UR12e, 2=UR10e
Base-Mounted Range Extender,
40m
Publicité
