Publicité
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
● Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
● Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
2.6 Battery tool use and care
● Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
● Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2.7 Vibration and noise reduction
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the
time the tool is in use, and use low-power/vibration
mode and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
• Check that the tool is in good condition.
• Only use accessories that are in good condition,
and suitable for the job.
• Keep a firm grip on the handles/grips.
2.8 Reciprocating saw safety
warning
Warning! Hold the power tool by the insulated
grips when you use it in areas where it can come into
contact with concealed electrical cables. Contact with
a live cable will cause the metal parts on the product to
also become live and can give the user an electric shock.
● Only use accessories recommended by the
manufacturer. The use of other accessories can result
in a risk of personal injury.
● Keep your hands away from the cutting area and
blade. If you hold the tool with both hands, they
cannot come into contact with blade.
● Do not put your hands under the workpiece. Contact
with the blade could cause personal injury.
● Start the tool before applying the blade to the
workpiece. If the blade jams it can slip or kick back
from the workpiece when the tool starts.
● Never hold the workpiece in your hands or across
your legs. Secure the workpiece on a stable surface. It
is important to support the workpiece properly so that
body contact is minimised, the blade does not jam,
and you do not lose control.
● Make sure there are no nails, screws or other foreign
objects in the workpieces.
● Do not use blunt or damaged blades. Blades with
blunt or damaged teeth produces more friction, which
can cause the blade to jam and increases the risk of
kickback.
● Take extra care when plunge cutting in walls or other
similar areas where you cannot see what lies behind.
The protruding blade can hit objects that can cause
kickback.
● Wear safety glasses, ear protection and safety gloves.
● Wear a dust filter mask if the work produces a lot of
dust.
● Wear a hair net if you have long hair.
● Do not use the product to:
• Saw firewood.
• Saw material that contains asbestos or other
harmful materials.
2.9 Additional safety instructions
Note! The product is battery-powered. Refer to the user
manuals for the battery and the charger for their safety
information.
Note! The product can get blocked when it get jammed
in the workpiece or when it get overloaded.
● Always wait until the product has come to a complete
stop before you put it down. The product can jam and
cause you to lose control of the power tool.
● Before starting work on walls, ceilings or floors, check
that there are no concealed electrical cables or
conduits. Use a live wire detector, or ask an electrician
for help. Failure to observe these instructions could
result in the risk of fire, explosion, electric shock,
personal injury or material damage.
EN
SV
NO
DA
PL
DE
FI
FR
NL
9
Publicité
