Publicité
By modifying the IP/Port/LCN of the first network group, it is possible to quickly apply the same parameters
progressively to all other existing or future network groups.
To do this, simply click the respective buttons at the bottom:
y Auto IP Addresses: Starting from the first entered IP address, assigns progressive IPs to all groups added to the list.
y Auto Port: Starting from the first entered port, assigns the same port to all other groups.
y Auto LCN: Starting from the first entered LCN, assigns a progressive LCN to all subsequent groups.
Clicking the icon in the rightmost column allows access to advanced program management.
In the first table, certain program parameters can be modified by directly entering values in the designated fields.
These parameters include:
y Program name
y Provider
y SID (Service ID)
y PMT PID
Once a parameter is modified, it can be restored to its original value (as shown in the second column) simply by
clicking the U-shaped arrow on the right of the modification field.
The last parameter in the list allows selecting, via a drop-down menu, how the program should be declared—either
Free to Air (FTA) or Encrypted by the decoder:
y Always automatic: The program is automatically declared Free to Air if decrypted by the CAM.
y Always yes: The program is always declared Free to Air, even if it is not decrypted by the CAM.
y Always no: The program is always declared encrypted, even if it is decrypted by the CAM.
y Not modified: The program is declared Free to Air only if it remains unchanged, meaning it is not sent to the CAM
for decryption..
Operating instructions
Fig. 10
41
Publicité
