Publicité
Replacing the Wheel
1.
Ensure that the battery is removed from the machine.
2.
Remove the wing nut, washer, bushings, wheel, rubber washer, and
wheel axle from the depth-of-cut track on the edger
1. Depth-of-cut track
2. Wheel axle
3. Wheel
4. Rubber washer
3.
Replace any damaged or missing parts; contact your Authorized
Service Dealer.
4.
Insert the wheel axle through the track with the tab facing down as
shown in
5.
Install the rubber washer, bushings, wheel, small washer, and wing
nut to the axle
6.
Tighten the wing nut to secure the wheel.
Figure
15.
(Figure
15).
Figure 15
5. Bushings
6. Washer
7. Wing nut
26
(Figure
15).
g334039
Publicité
