Publicité
Operation
Starting the Edger
1.
Align the cavity in the battery pack with the tongue on the handle
housing
2.
Push the battery pack into the handle until the battery locks into the
latch
(Figure
1. Battery latch
3.
To start the edger, pull back on the lockout button, then squeeze
the run trigger
Note:
Once the edger is running you can release the lockout button.
1. Lockout button
(Figure
7).
7).
(Figure
8).
Figure 7
Figure 8
2. Run trigger
18
g333238
g333239
Publicité
