Internet Radio; Music Player - Teac AG-H600NT Mode D'emploi

Internet radio

Cannot connect to the Internet.
e Connect the wireless LAN antenna properly to the unit.
e Check if your computer can connect to the Internet using the
same network.
e Enter a correct passkey to the network.
e Check the settings of your network's firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
Cannot listen to a station/Podcast.
e The broadcaster has a temporary trouble with Internet
connection.
e Check if your Internet connection is not temporarily
disconnected or disturbed.
Cannot find a station/Podcast in the station list.
e The station/Podcast may not be broadcast at the moment.
e The link of the station/Podcast may be out of date.
e The allowed number of simultaneous listeners of station/
Podcast might have reached the maximum.
e The Internet connection speed is too slow.
e Add the station/Podcast to your own station list by accessing
the Internet radio portal.

Music Player

Cannot connect to the LAN.
e Connect the wireless LAN antenna properly to the unit.
e Check if your computer can connect to the Internet using the
same network.
e Enter a correct password to the network.
e Check the settings of your network's firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
e Check if the computer is not shut down or in the sleep mode.
Set up the computer not to shut down or turn into the sleep
mode automatically.
e There may be a problem with the network authentication. Press
the SOURCE button or BAND button to select the Music Player
again.
Cannot find a track. (Shared Media)
e Add the track to the media library of Windows Media Player.
e Set your AG-H600NT/DNT as a "Unknown Device" in the device
list of Windows. (page 32)
e Select "Allow" for AG-H600NT/DNT ("Unknown Device")
(page 32).
e Check the file format. Playable formats are MP3 and WMA.
e If you have antivirus security software enabled on your
computer, the unit may fail to connect.
Cannot find a folder/file. (Shared Folders)
e Configure the folder/file sharing setting. (pages 33 to 35)
e Add the file to the shared folder.
e Enter a correct password of the user account.
e Check the file format. Playable formats are MP3 and WMA.
e If you have antivirus security software enabled on your
computer, the unit may fail to connect.
40
Troubleshooting (2)
If normal operation cannot be recovered, unplug the power
cord from the outlet and plug it again.
To reset your unit to the factory default
If your unit is not working properly, it might help to reset it to the
factory default.
This will clear your network settings (including pass keys) and
other user settings (preset stations etc.).
1. If the unit is on, press the STANDBY/ON button on the remote
control unit turn the unit on standby.
2. Hold down the VOLUME/SET knob until the unit turns on.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any fluid
completely. Do not use thinner, benzine or alcohol as they may
damage the surface of the unit.