Rds; Pty Search - Teac AG-H600NT Mode D'emploi

RDS

The Radio Data System (RDS) is a broadcasting service which allows
stations to send additional information along with the regular radio
programme signal.
RDS works on the FM waveband in Europe only.
Tune in an FM station (see page 21).
1
2 Press the INFO/RDS button.
Each time the INFO/RDS button is pressed, the RDS mode is
changed as follows:
PROGRAM SERVICE
When you select PROGRAM SERVICE, "PROGRAM SERVICE" will
blink for about 3 seconds and then the programme service
name or a station's name will be displayed. If there is no
programme service data, the frequency will be displayed.
RDS CLOCK TIME
Displays the information about times provided from the station.
When you select RDS CLOCK TIME, "RDS CLOCK TIME" will blink
for about 3 seconds and then the clock time will be displayed.
RDS PROGRAM TYPE
When you select RDS PROGRAM TYPE, "RDS PROGRAM TYPE"
will blink for about 3 seconds and then the programme type
will be displayed.
RDS RADIO TEXT
When you select RDS RADIO TEXT, "RDS RADIO TEXT" will blink
for about 3 seconds and then the news of stations composed of
up to 64 symbols will be displayed.
If there is no radio text data, RDS mode will be automatically
switched to PROGRAM SERVICE mode.
TRAFFIC ANNOUNCE
When you select TRAFFIC ANNOUNCE, "TRAFFIC ANNOUNCE"
will blink for 3 seconds and then the unit searches for a traffic
announcement.
< When a traffic programme is found, the TRAFFIC ANNOUNCE
mode is switched to PROGRAM SERVICE mode.
24

PTY Search

1
You can search for stations by programme type.
1 Select FM as the source.
Press the SOURCE button repeatedly.
< You can also use the BAND button on the remote control unit.
Press the INFO/RDS button for more than 3 seconds.
2
3 Select the desired programme type (PTY).
Turn the MULTI JOG/ENTER knob to select an item
Select your desired one from among 31 kinds of PTY programmes.
The programme type will blink.
Press the MULTI JOG/ENTER knob.
4
Searching starts.
2
3 4