Adjusting The Sound Generation And Effects Parameters - Key B Organ Viscount Legend Expander Mode D'emploi

User Manual
5. ADJUSTING THE SOUND GENERATION
As described in point 5 of par. 3.1, the
shows the value of all editable parameters. For your convenience, all parameters are printed on the upper part
of the front panel, together with their short names as they appear on the display.
NB
The GLOBAL and MIDI functions are described in chapters 6 and 7 respectively.
To display a parameter, press the button of the relevant section (e.g. [REVERB] for the reverb parameters).
Since each section contains several parameters, press the same button again to cycle through the various
parameters. The following diagram shows how to navigate through parameters:
Switch on
Memory selection
Once the desired parameter is selected, use [VALUE +] and / or [VALUE -]. The first time the buttons are
pressed, the display shows the current value; press again to modify the value. Parameters that have an
adjustable value show a dot on the top left of the display, unlike other parameters which can only be selected.
As the diagram above shows, wait 5 seconds or press another button of the programming section to leave the
current field.
AND EFFECTS PARAMETERS
Legend Exp
[REVERB]
pressed
Memory selection
Selectable field
has a 3x8 segments display on the front panel, which
[REVERB]
pressed
Reverb Type selection
No buttons pressed
for 5 seconds
[REVERB]
pressed
Reverb Pre Rotary selection
Adjustable field
EN - 16
Reverb Pre Rotary selection