Publicité
Les langues disponibles
Les langues disponibles
ding fixture (slave group). This is a simple way to create a running light effect with a large number
of identical lights that are running the same software version, which would otherwise require a
suitable DMX controller and extensive programming. Connect the slave and master units (same
model, same software version) using a DMX cable.
Assign the lights to one of up to 11 groups (plus Group 0) according to preference, whereby se-
veral lights can be assigned to one group. The group number is also the factor by which the delay
time set in the master unit is multiplied.
Set-up example:
SYSTEM SETTINGS (Settings)
Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to
select the menu item Settings and confirm with ENTER.
This takes you to the sub-menu to set sub-menu items (see table, select with ⏶ or ⏷, confirm
with ENTER, change value or status with ⏶ or ⏷, and confirm with ENTER).
Display rotation
Switching off the
display lighting
Operational status
on control signal
interruption
20
No display rotation
Display is rotated by 180° (for example, for over-
head installation)
Deactivation of the display lighting after approx.
30 seconds of inactivity
Display lighting permanently on
Last command is retained
Instant blackout
User Color 1 is activated
Publicité
