Cameo ROOT BAR 6 Manuel D'utilisation page 16

Set-up example:
AUTO STAND-ALONE OPERATING MODE
The eight available auto programs partly comprise non-editable colour-change sequences and
partly random scenes. Brightness, running speed, music control, microphone sensitivity, and delay
can be set separately for each program.
Starting from the main display, press MENU to access the main menu. Using the ⏶ and ⏷ but-
tons, select the menu item Stand Alone and confirm with ENTER. Again use ⏶ and ⏷ to select
the stand-alone operating mode Auto and confirm with ENTER. Now use ⏶ and ⏷ to select the
desired program (program 1 to program 8) and confirm again with ENTER.
This takes you to the sub-menu for setting the sub-menu items (see table, select with ⏶ and
⏷, confirm with ENTER, change value or status with ⏶ and ⏷, and confirm with ENTER). The
settings for each program are made separately and are retained even after restarting the device.
AUTO STAND-ALONE OPERATING MODE (Program 1–Program 8)
Sets the brightness
Sets the running speed
Activates/deactivates music control
Sets microphone sensitivity
Delay time for slave groups
STATIC STAND-ALONE OPERATING MODE
The Static stand-alone operating mode allows the Dimmer, Strobe, and R, G, B, W, and A values to
be set directly on the device with values in a similar way to a DMX controller. This allows you to
16
Deactivates music control
Activates music control