Do You Want To Enter Holiday Periods - Siemens Synco 700 Manuel D'utilisation

Do you want to enter holiday periods?

For each room group, you can enter 16 holiday periods
on your central control unit. During a holiday period,
there is no heating program active but only the same
room operating mode or DHW operating mode.
Date
On the submenus Entry 1, Entry 2, Entry 3 , etc., you need
to enter for each holiday period:
• Menu option Start: The date, year and time of day of
the first day of the holiday period
• Menu option End: The date, year and time of day of
the last day of the holiday period
• Menu option Reason: The holidays
Welcome > Main menu > Room group 1... > Holidays / special days > Calendar... > Entry 1...
Path:
Path: Welcome > Main menu > Room group 1... > Holidays / special days > Rm optg mode holid:
Welcome > Main menu > Room group 1... > Holidays / special days > DHW optg mode holid:
Path:
Before making entries, prepare a yearly time schedule for all holiday periods!
18
Siemens Building Technologies / HVAC Products
Every entry can be deleted (menu option Cancel entry).
Room operating mode
Enter the required room operating mode with menu
option Rm optg mode holid. Available are Economy
Protection . The entry will apply to all holiday periods.
DHW operating mode
Enter the required DHW operating mode on operating
line DHW optg mode holid. Possible are
Reduced and Protection
holiday periods.
CE1B3121x2-en
, Normal ,
. The entry will apply to all
74 319 0462 0 a
or
15.04.2005