Do You Want To Have The Current Plant Data Displayed - Siemens Synco 700 Manuel D'utilisation

Do you want to have the current plant data displayed?

If you are on the start display (welcome picture), you
only have to press the INFO button or turn the OK knob
and you will be on the information level
the key plant data listed.
Please note: The display depends on the type of plant.
You cannot change any values here!
Now, press the INFO button or turn the OK knob. This
will take you from one info page to the next.
The ESC button will take you straight back to the start
display.
You reach the Info page only from the start display! However, if you press the INFO button while one of the menus is
displayed, it is not the current plant data that appear, but a help display for each datapoint with the cursor. The help
display shows the path you have followed thus far and the correct datapoint name.
14
Siemens Building Technologies / HVAC Products
You can display the following data, for example:
• Room operating mode (state, reason) per room group
. Here, you find
• Time switch per room group
• Various data (e.g. outside temperature)
CE1B3121x2-en 74 319 0462 0 a 15.04.2005