You Don't Want To Operate The Plant According To The Time Program - Siemens Synco 700 Manuel D'utilisation

You don't want to operate the plant according to the time program

Other room operating modes
If you don't want to use the time program (that is, no
automatic operation of plant), choose one of the follow-
ing room operating modes from operating line
Preselection:
Comfort Plant ON, heating / cooling to the
Comfort setpoint
Precomfort Plant ON, heating / cooling to the
Precomfort setpoint
Economy Plant OFF, unoccupied mode
heating / cooling to the Economy
setpoint; night cooling and frost
protection function activated
Protection Plant OFF,
frost protection function activated
Path:
If you want to heat / cool temporarily with a «Continuous operating mode»,
10
Siemens Building Technologies / HVAC Products
Welcome > Main menu > Room group 1... > Room operating mode... > Preselection: > ...
don't forget to return to AUTO mode in due time!
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Settings: pages 11.
CE1B3121x2-en 74 319 0462 0 a 15.04.2005